MarSurf M 310 / M 310 C2 for transverse measurement / M 310 with printer
FEATURES
Mobile roughness measurement
– guaranteed success!
• Compact roughness measuring instrument for mobile use
• Simple and intuitive to use: as easy as using a smartphone
• Large, illuminated 4.3” TFT touch display
• Adjustable display
• Micro USB interface for remote control using ASCII commands, e.g. using software for statistical process control
• USB-A interface – for connection of e.g. a USB wireless adapter or the USB-/Bluetooth® capable printer Star Micronics SM-L200 printer
• Wireless transmission of measurement results via wireless stick to the free MarCom software
• Remote start of measurement via cable or wireless
• Connection of a scanner for automatic start of the measuring
programs or reading of protocol texts via barcode or QR code
• Specification of the intersection line C in ±m or in % of Rz for the parameters Rmr and tp
• Data backup as TXT, X3P, CSV or PDF file
• Transfer of measuring records and data optionally via USB-/Bluetooth® capable printer Star Micronics SML200 or cable
• IATF 16949 compliant – safe traceability with MarConnect
• Print directly on mobile printer (as option or directly in set with printer)
• Create complete PDF measuring records directly in the measuring instrument
• Customer-specific comments for the PDF measuring record can be entered directly into MarSurf M 310
• Display and printout of the MRC and ADC diagram
• Storage of measuring programs (quick and easy)
• Mains-independent operation: Over 1200 measurements without having to recharge the instrument
• An all-in-one solution. Small and lightweight (approx. 500 g)
• Instrument flexibility: removable drive unit
• 31 thread parameters: offer the same range of functions as a laboratory instrument.
• Roughness standard stored within housing aids in reducing errors
• Quick access to your frequently used functions via the Favorites list in the display
• Automatic cutoff selection, so even non-specialists can be sure of getting the correct measuring results
• Additional versions with transverse drive unit available as MarSurf M 310 / M 310 C2 for transverse measurement / M 310 with printer M 310 C2 or MarSurf M 310 set without probe
• Free software “MarWin Easy Roughness Viewer” for further documentation (statisics, multiple profiles and results on one page etc.) available for download on the Mahr website.
Package contents:
• MarSurf M 310 basic device
• Drive unit (detachable)
• 1 standard probe PHT6–350, conforming to standards
• Built-in rechargeable battery
• Roughness standard integrated into housing (detachable), including Mahr calibration certificate
• Probe protection / V-block holder
• Charger / 3 adapters
• Height adjustment (integrated)
• Carry case with shoulder strap
• USB cable
• Hand-held support with height adjustment (pair)
• Roughness standard integrated into housing (detachable), including Mahr calibration certificate
• Extension cable for drive unit (length 1.2 m)
• Operating instructions
Applications:
• For shafts and housing components
• For large machines
• For large workpieces
• For milled and turned parts
• For ground and honed workpieces
• On the production line or directly on the machine; ideal for rapid testing of the surface roughness of a workpiece in or on the machine
| Order No. | 6910260 | 6910264 | 6910265 | 6910267 | 6910268 | |
|---|---|---|---|---|---|---|
| Type | M 310 | M 310 C2 for Transverse measurement |
M 310 | M 310 with printer | ||
| Parameters | A1, A2, Ar, CF, CL, CR, Mr1, Mr2, R, R3z, RPc, RS, RSk, RSm, Ra, Rk, Rmax, Rmr (tp (JIS, ASME) is equivalent to Rmr), Rp, RpA (ASME), Rpk, Rpm, Rpm (ASME),Rq, Rt, Rvk, Rx, Rz, Rz (JIS), Rz (Ry (JIS) is equivalent to Rz), Vo | |||||
| Stylus | 2 μm | 5 μm | 2 μm | 5 μm | ||
| Calibration function | Dynamic; Ra, Rz, Rsm | |||||
| Storage capacity | Min. 3900 profiles, min. 500,000 results, min. 1500 PDF records, expandable to 32 GB with Micro SD card |
|||||
| Languages | German, English, French, Italian, Spanish, Portugese, Dutch, Swedish, Russian, Polish, Czech, Japanese, Chinese, Korean, Hungarian, Turkish, Romanian |
|||||
| Other | Lock/password protected, date/time | |||||
| Data interface | USB A, USB B, MarConnect (bidirectional), Micro SD slot for SD / SDHC cards up to 32 GB | |||||
| System of protection | IP 40 | |||||
| Rechargeable batteries | Lithium-ion battery, 3.7 V, nominal capacity 11.6 Wh, min. 1200 measurements | |||||
| Wide range power supply | 100 to 264 V | |||||
| H x W x D | mm | 160 mm x 77 mm x 50 mm | ||||
| Measuring principle | Stylus method | |||||
| Probe | Inductive skidded probe | |||||
| Measuring range | mm | 0.350 | ||||
| Profile resolution | 8 nm | |||||
| Filter according to ISO/JIS | Gaussian filter as per ISO 16610–21 (formerly ISO 11562), special filter as per DIN EN ISO 13565–1, Lambda s filter as per DIN EN ISO 3274 (can be switched off) |
|||||
| Cutoff Ic according to ISO/JIS | 0.25 mm, 0.8 mm, 2.5 mm, automatic filter detection, variable | |||||
| Number n of sampling length according to ISO/JIS |
Selectable: 1 to 16 | |||||
| Short stroke under ISO/JIS | Selectable | |||||
| Traversing length Lt according ISO/JIS |
1.5 mm, 4.8 mm, 15 mm, N x Lc, variable, automatic | |||||
| Traversing length according ISO 12085 (MOTIF) |
1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm | |||||
| Evaluation length In according to ISO/JIS |
1.25 mm, 4.0 mm, 12.5 mm | |||||
| Measuring force | N | 0,00075 | ||||
| Positioning speed | 0.5; 1.0 | |||||
| Order No. | Description | Type |
|---|---|---|
| 6910271 | Set consisting of Star Micronics SM-L200 Bluetooth® printer and USB wireless adapter | DP-B1 |
| 4102603 | Data cable USB bi-directional (2 m) | DK-U1 |
| 3028620 | USB 2D scanner Honeywell Xenon 1900 | Handset scanner cable |
| 3003856 | USB wireless adapter | USB BT |
| 3028820 | Zebra Techn. Corp. DS2278 Bluetooth® barcode scanner | Handset scanner BT |
| 6850540 | PHT pick-up extension 80 mm | PHT (80 mm) |
| 6111520 | Standard probe 2 μm | PHT 6–350 |
| 6111526 | Standard probe 5 μm | PHT 6–350/ 5μm |
| 6111527 | Standard probe 10 μm | PHT 6–350/ 10μm |
| 6111521 | Probe for bores with a diameter larger than 3 mm | PHT 3–350 |
| 6111524 | Probe for grooves | PHT 11–100 |
| 6111525 | Probe for concave and convex surfaces | PHTR–100 |
| 6111522 | Probe for gear tooth flanks | PHTF 0.5–100 |
| 6111523 | Probe for metal sheets | PT 150 |
| 6850715 | Pick-up protection with header V-block, steel | PHT-ts4 |
| 7028530 | Pick-up protection header V-block, plastic | PHT-ts3 |
| 6910209 | Mount PS 10/M310 on measuring stand ST | ST-a3 |
| 6910435 | RD 18 C / PS 10 upright holder for cylindrical drive unit, Ø 8 mm | ST-a2 |
| 6710803 | Measuring stand 300 mm with cast iron base | ST-D |
| 6710806 | Measuring stand 300 mm with granite plate | ST-F |
| 6710807 | Measuring stand 300 mm with granite plate and T-slot | ST-G |
| 2247086 | Adjustable mounting bracket to connect to 814 SR | 814 Sh |
| 4426100 | Height measuring and scribing instrument, 0 –350 mm | 814 SR |
| 4426101 | Height measuring and scribing instrument, 0 –600 mm | 814 SR |
| 4102357 | 16 EXu data connection cable USB (2 m) (hardware Revision 1) | 16 EXu |
| 4102603 | Data cable USB bi-directional (2 m) (hardware Revision 2) | DK-U1 |
| 6710401 | V-block | PP |
| 6710604 | Parallel vice | PPS |
| 6710529 | XY Table | CT 120 |
| 4246819 | Set of miniature precision vises, set contents: mini-vises, jaw widths 15 / 25 / 35 mm, with tripod and V-blocks and miniature dividing attachments |
109 PS |
| 6820420 | Roughness standard with Mahr calibration certificate, profile depth 10 μm | PRN 10 |
| 4413000 | Measuring tripod with triangular pedestal 300 mm | 815 GN |
| 4413001 | Measuring tripod with triangular pedestal 500 mm | 815 GN |
| 4413005 | Measuring tripod with triangular pedestal 750 mm | 815 GN |
| 4416000 | Measuring tripod with magnetic base | 815 MA |
| 6299054 | Evaluation software | SW XR 20 |
| 6910240 | Protective films for LCD, real glass (3 pieces) | SF LCD |
| 6800000DKS | Geometric standard, sinusoidal profile | MGS 1 |
| 6800000KAL | Geometric standard, sinusoidal profile | MGS 1 |
| 6800001DKS | Geometric standard, sinusoidal profile | MGS 3 |
| 6800001KAL | Geometric standard, sinusoidal profile | MGS 3 |
| 6800002DKS | Geometric standard, sinusoidal profile | MGS 10 |
| 6800002KAL | Geometric standard, sinusoidal profile | MGS 10 |
